Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021
78
Refilling operating materials
Maintenance, Repairs and Shut-Down
6.
Close the
"
fuEl
rEfilling
opEning
"
.
7.
Move the
"
SwivElling
holding
platE
"
back.
8.
Fit the
"
locking
tab
"
for the
"
SwivElling
holding
platE
"
.
9.
Dispose of the caught diesel properly.
That's it!
8.2.2 Refilling engine oil
• The machine is switched off and secured against accidental switch-on, see the chapter
"Operation" > "Switching off machine" (page 72).
• New suitable engine oil
• Suitable catch container
• Suitable funnel with hose
• Cloths
Carry out the following steps:
1.
During an oil change
: If necessary, drain off the old engine oil into a suitable catch
container via the
"
drain
hoSE
"
and the
"
oil
drain
ScrEw
"
(17 mm).
2.
Open the
"
rEfilling
opEning
for
EnginE
oil
"
.
3.
Pour the engine oil into the
"
EnginE
"
with a suitable
"
funnEl
with
hoSE
"
.
4.
Close the
"
rEfilling
opEning
for
EnginE
oil
"
.
5.
Wipe up any spilled engine oil with a
"
cloth
"
.
6.
Dispose of the caught engine oil properly.
That's it!
Condition:
Required:
