Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021
11
EC Declaration of Conformity
Product Information
1.5 EC Declaration of Conformity
EC Declaration of Conformity
according to Machinery Directive 2006/42/EC Appendix II 1.A
and Outdoor Directive 2000/14/EC Appendix II
Manufacturer:
CEDIMA® Diamantwerkzeug- und Maschinenbaugesellschaft mbH,
Lärchenweg 3, 29277 Celle, Germany
Collection and storage of the technical documentation:
The CEO of CEDIMA® Diamantwerkzeug- und Maschinenbaugesellschaft mbH, Siedemeierkamp 5,
29227 Celle, Germany, is responsible for the storage of the technical documents.
Machine model:
CF • 1020 D Joint Cutter
Machine number range:
14102000 C - 241020XX C
Year of manufacture:
2014 - 20XX
Measured sound pressure level (LWA):
114 dB [A]
Machine description:
The CF • 1020 D Joint Cutter is a walk-behind, hand-guided machine. The joint cutter is used for
wet cutting in asphalt and concrete, as well as in similar abrasive construction materials.
The CF • 1020 D joint cutter can use diamond saw blades up to 500 mm with a maximum diamond
saw-blade clamping width of 20 mm (on left and right). The diamond saw blades are driven by a
7.3 kW diesel engine via a drive belt. The maximum cutting depth of 200 mm is steplessly adjust-
able. The flushing water supply is provided via pressurised water or a separate tank.
This machine complies with all pertinent regulations of the following EU directive:
EU Directive 206/42/EC
EMC Directive 2004/108/EC 2004
EU Directive 2006/95/EC 2006
The following harmonised standards were applied:
DIN EN ISO 12100-1 Safety of machinery - Basic terms, general principles for design -
Part 1: Basic terminology, methodology
DIN EN ISO 12100-2 Safety of machinery - Basic terms, general principles for design -
Part 2: Technical principles
DIN EN 13862:2009
Floor cutting-off machines - Safety
DIN EN ISO 60204-1 Safety of machinery - Electrical equipment of machinery -
Part 1: General requirements
This declaration of conformity immediately becomes invalid if changes are incorporated to
the machine which have not been approved by
CEDIMA® Diamantwerkzeug- und Maschinenbaugesellschaft mbH!
29227 Celle, Germany, dated 08/06/2018
____________________________________________
Bob Siemsen (CEO)
EC Declaration of Conformity
This declaration becomes void as soon as major modifications are made to the machine. A
new conformity procedure in accordance with the EU machinery directive is then required.
