Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021
15
Safety instructions
Safety
3.1.2 Impermissible operating conditions
The operating safety cannot be ensured under impermissible operating conditions. There-
fore, it is essential to avoid impermissible operating conditions.
The machine may not be operated under the following conditions:
• Persons or objects are located in the danger area.
• Safety equipment does not function or has been removed.
• Malfunctions have been detected.
• Damage has been detected.
• Maintenance intervals have been exceeded.
3.1.3 Notes on operation
Safety-conscious, foresighted behaviour of the personnel prevents dangerous situations dur-
ing operation.
Observe the following points when working with the machine:
• Before starting work, familiarise yourself with the surroundings and circumstances of the
site. This includes obstacles which might impede work, the soil bearing capacity and the
required safety measures, e.g. barriers separating the work site from public traffic and
the possibility to render first aid in case of accidents.
• Only use the machine on level, firm and stable surfaces. Ensure the stability.
• Clear the operating site of anything that could impede work.
• The machine may only be put into operation by persons qualified to do so.
• The machine may only be operated by persons qualified to do so.
• Safety equipment may not be modified, removed, bypassed or disabled.
• Structural changes to the machine are not permissible without the manufacturer's ap-
proval. This also applies to the installation and configuration of safety devices as well as
to welding and drilling work on supporting structures.
• Working areas may not be changed.
• Any change to the machine must be reported immediately to the responsible person.
• Defects or damaged components of the machine must be replaced immediately. Use
only original spare parts!
• All spare parts and tools must comply with the technical requirements specified by the
manufacturer. With original spare parts, this is always ensured.
• Adhere to the legally prescribed intervals for testing and inspection of the machine and
those specified in this operating manual!
• The danger areas must always be clear. Persons may only enter the danger areas with
the machine de-energised.
3.1.4 Notes on using accessories and aids
The safety equipment of the machine may not be deactivated when using accessories or
aids.
