Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021
63
Commissioning
Set-Up
WARNING
Danger of injury on rotating parts of the machine!
There are parts on the machine which rotate. The operator can be pulled in in these areas
and seriously injured!
Always remain in the working area of the machine during operation, see the chapter
"Machine Overview" > "Working and danger areas" (page 46).
Never reach into rotating parts or under protective covers during operation!
Always make sure that there are no persons within the danger area of the machine dur-
ing operation!
CAUTION
Danger of injury during operation due to machine properties!
The machine is very loud during operation. The machine throws out abrasive material during
cutting.
Always wear hearing protection, protective gloves, safety shoes, protective goggles and
a dust protection mask during operation.
Carry out the following steps:
1.
Check the
"
fluShing
watEr
connEctionS
"
for leaks.
2.
Switch on the machine, see the chapter "Operation" > "Switching on machine"
3.
Check all
"
opErating
ElEmEntS
"
for correct operation.
?
Operating elements do not operate as desired?
Contact your superior.
Contact the manufacturer.
4.
Carry out an operating check of the
"E
mErgEncy
-S
top
button
"
on the machine, see the
chapter "Safety" > "Triggering Emergency-Stop" (page 22).
The checks have been carried out.
That's it!
Carry out checks
