manualshive.com logo in svg

Cedima 14102000 C, Перевод оригинального руководства по эксплуатации

Поделиться
Скачать
Cedima 14102000 C Скачать руководство пользователя страница 10

Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021

10

Delivery scope

Product Information

1.4  Delivery scope

The machine is delivered ready to operate. Prior to operation the operator must convert and 

fit the height-adjustable handle and the crank handle – cutting depth adjustment. Addition-

al information is provided in the chapter "Set-up" > "Commissioning“ (page 61).

1.4.1  Moving parts

Moving, removable parts are fitted on the machine:

•  Removable water container
•  Blade guard
•  Height-adjustable handle
•  Protective cover of cutting shaft
•  Visor device

1.4.2  Accessories supplied

The machine is delivered with the following accessories:

•  Allen key (10 mm)
•  Open-ended spanner (17 mm)

1.4.3  Spare parts, optional accessories

No spare parts are delivered with the machine. Spare parts are available on request. The spare 

parts list is contained in the supplier documentation for this machine. Ask for optional acces-

sory parts directly from CEDIMA® Diamantwerkzeug- und Maschinenbaugesellschaft mbH.

1.4.4  Other applicable documents

The operating manual of the drive engine is included with the machine.

Содержание 14102000 C































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды