Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021
31
Parts of machine
Machine Overview
4.2.2 Removable water tank
The machine is equipped with a
"
rEmovablE
watEr
tank
"
for its own supply of flushing water
for short cuts. The removable water tank is fitted on a
"
SwivElling
holding
platE
"
. The opera-
tor must fill the
"
rEmovablE
watEr
tank
"
with water before the start of cutting. The flushing
water from the
"
rEmovablE
watEr
tank
"
flows into the
"
bladE
guard
"
due to the water's own
weight. The operator controls the flow rate using the
"
watEr
valvE
–
rEmovablE
watEr
tank
"
.
Removable water tank
Legend
No.
Designation
Function
1
Refilling opening – flushing
water
The flushing water must be poured in here. The
tank can be removed for filling. However, the opera-
tor can also fill the tank while fitted.
2
Removable water tank
Used to store 28 litres of flushing water. The
removable water tank can be held and carried using
the integrated handle.
3
Water valve – removable
water tank
Use to regulate the flow rate and to switch the flush-
ing water feed of the removable water tank on and
off.
4
Locking tab
Use to lock the removable water tank on the swivel-
ling holding plate.
5
Swivelling holding plate
Used as the holding plate of water tank in the
machine. The holding plate can be swivelled to the
side so that the fuel tank can be accessed. The hold-
ing plate is locked against accidental swivelling with
a locking strap.
