manualshive.com logo in svg

Cedima 14102000 C, Перевод оригинального руководства по эксплуатации

Поделиться
Скачать
Cedima 14102000 C Скачать руководство пользователя страница 21

Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021

21

Safety equipment

Safety

3.4.2  Fixed safety equipment

Fixed safety equipment secure dangerous areas on the machine. They have no effect on the 

movements of the machine.

The fixed safety equipment includes:

•  The protective cover of the V-belts
•  The blade guard
•  The protective cover of the cutting shaft

The fixed safety equipment prevents or impedes direct access to:

•  Rotating or moving parts of the machine
•  Live parts of the machine.

The fixed safety equipment may only be removed for maintenance and repair work and must 

be refitted prior to restarting.

Fixed safety equipment

Legend

No.

Designation

1

Blade guard

2

Protective cover of V-belts

3

Protective cover of cutting shaft

3.4.3  Fixed safety equipment

The machine is not equipped with any moveable safety equipment.

3.4.4  Signalling devices

The machine is not equipped with any signalling devices.

Содержание 14102000 C































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды