Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021
67
Daily start-up
Operation
The highest engine speed has been selected.
The engine adjustments for operation have been carried out.
Carry out the following steps:
1.
Pull out the
"
StartEr
wirE
"
using the
"
StartEr
handlE
"
of the
"
rEcoil
StartEr
"
.
!
Pull out the starter wire until strong resistance is felt when pulling.
2.
Allow the
"
StartEr
wirE
"
to run back.
3.
Start the machine by pulling firmly and in one stroke using the
"
StartEr
handlE
"
of the
"
rEcoil
StartEr
"
.
The machine engine starts up.
The cutting shaft and the fitted diamond saw blade turn.
?
The machine engine does not start?
Repeat steps 1 to 3.
Set the throttle lever to maximum.
Check the fill level of the fuel tank.
4.
Using the
"
SpEEd
adjuStmEnt
lEvEr
"
, reduce the engine speed to the operating speed.
5.
Carry out the operating check of the
"
EnginE
Stop
"
.
The engine has been started.
That's it!
Start engine
