manualshive.com logo in svg

CE+T Power T2S-ETH, Руководство пользователя

Поделиться
Скачать
CE+T Power T2S-ETH Скачать руководство пользователя страница 52

7.  SNMP Port number is standard port 161 for V3 communication

8.  SNMP V3 will not communicate when port number is changed from default port number even if the same port 

number is configured at the NMS end.

9.  SNMP Base OID need not be modified

10. Context name has to match the name used in NMS, Context name accepts a maximum of 15 ASCII characters.

11. SNMP NoAuth user is configurable, the same user name has to be used in NMS SNMP V3 profile. 

12. User name accepts a maximum of 15 ASCII characters.

9.1.6.2  SNMP V3 No Auth + No Encrypt trap settings.

1.  Port Trap Choose the port on which the trap is send and default port is port 162

2.  Traps will not be received if the port number is changed.

3.  Choose SNMP versions as SNMP V3 No Auth. + No Encrypt.

4.  Only for SNMP V3 trap mode: specify the “engineID”. Identifier that allows you to know which device is sending 

you the trap. EngineID should not be modified.

Note: SNMPv3 mandates that the message is rejected unless the SNMPv3 user sending the trap already exists in the 
user database. The user database in a SNMPv3 application is actually referenced by a combination of the user’s name 
(called a “security Name”) and a identifier for the given SNMP application your talking to (called an “engineID”). 
(source : http://www.net-snmp.org/tutorial/tutorial-5/commands/snmptrap-v3.html)

5.  Standard user name for SNMP v3 No Auth. + No Encrypt. User is “snmp3TrapUser” this not configurable, But this 

username has to be added in NMS to receive traps.

6.  Trap version for T2S ETH is CET MIB Traps.

7.  Traps will not be received when UPS MIB Traps are selected.

52 

– Monitoring T2S - ETH User Manual – v1.4

SNMP

Содержание T2S-ETH

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды