manualshive.com logo in svg

CE+T Power T2S-ETH, Руководство пользователя

Поделиться
Скачать
CE+T Power T2S-ETH Скачать руководство пользователя страница 47

9.1.3.2  MIB Design in the T2S ETH and Catena Products

Each component in the system or device shall be monitored and therefore will be described by its own Management 
Information Base (MIB) structure file which describes the data provided by that MIB.  The data elements in a MIB are 
grouped in objects, and each object may hold any number of child objects specified as either scalar values or tabular 
values.   

In CET-TSI MIB Device objects are grouped to a high level table tsiObjects, a Table is effectively specified as a group 
of scalar values each scalar is a column in the table.  Tables are used to provide multiple groups of information 
(multiple rows).The first child of tsiObjects are tsiModules,tsiPhases, tsiACGroups, tsiDcGroups, tsiAlarms, tsiTraps, 
tsiEventDescription, tsiT2SInfo, tsiConfiguration

For example, tsiModules  is the table which holds all module information if there are multiple Module components on a 
given system, tsiModuleseen MIB table will provide an instance (row) for each module like tsiModuleSeen.1 (.1) is the 
instance referring to first module.

9.1.4  SNMP V1 Configuration

SNMP version 1: the oldest flavor.  Easy to set up - only requires a plaintext community. A community string sent in 
plaintext, possibly from a restricted range of allowed IP addresses, is as good as the security gets. 

9.1.4.1  T2S ETH web 

SNMP configuration can be done from T2S ETH web page when logged in as expert login.T2S ETH when used as a 
standalone communication card it only supports SNMP V1. When T2S ETH is connected to Catena Display then User 
can configure SNMPV2C and SNMPV3.

9.1.4.2  Network Configurations for T2S ETH Standalone

1.  Login to T2S web link 

http://192.168.0.2/index.html

 as Expert login

2.  Click on button “

Parameters

” at the end of the page

3.  Go inside “

Monitoring

” menu 

4.  Click on “

Network

” sub menu

5.  Connection mode Hardware setup should be Standalone

6.  If you’re on a network with DHCP You can just enable the DHCP inside the Network submenu of the “

Monitoring

” 

menu.

7.  Turn DHCP to enable  

8.  Click “Save”.

9.  When DHCP is enabled IP to T2S will be assigned by the DHCP server or the Router to which T2S ETH is 

connected. 

47 

– Monitoring T2S - ETH User Manual – v1.4

SNMP

Содержание T2S-ETH

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды