manualshive.com logo in svg

CE+T Power T2S-ETH, Руководство пользователя

Поделиться
Скачать
CE+T Power T2S-ETH Скачать руководство пользователя страница 39

39 

– Monitoring T2S - ETH User Manual – v1.4

Catena

8. Catena

8.1  Introduction

Catena is the display solution for T2S ETH. Using it, you get access on a 7’’ display directly in the system, providing the 
same graphical user interface as the T2S ETH when accessed remotely.

8.2  User interface

As described before, the user interface is the same if the system is accessed remotely or directly on the 7’’ display.

The only limitation is the relay testing button, which is not available in Catena.

8.3  Ethernet connections

Catena has 3 ETH connections, two at rear and one at front.

8.3.1  Rear connections

One is dedicated to connection with T2S ETH while the second one is for permanent network connection. On this one, 
Catena offers extra protocols: SNMP v2c, v3 and Modbus over TCPIP. See following section “Protocols” about these.

8.3.2  Front connection

The front ETH connection is the maintenance access of the Catena. As it’s providing a DHCP server, it’s not needed 
anymore to change your laptop settings to connect point to point on the device.

When plugging an RJ45 cable between Catena and your laptop, the following popup will be displayed:

To get access to the user interface, just follow instruction from the popup:

 

•

Open a web browser (Chrome or Firefox)

 

•

Type http://catena.local in the address bar

When the cable is unplugged, the display is accessible again.

Important remark: this feature is only available in latest version (both Hardware and Software).

Содержание T2S-ETH

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды