CE+T Power T2S-ETH, Руководство пользователя

Страница: 24 / 96

24 – Monitoring T2S - ETH User Manual – v1.4
Graphical User Interface
3

System
Clicking the magnifier will bring the user to information regarding the system such as
redundancy, available power and so on. It is also the path to the module level monitoring.
The three LEDs are showing the state of each converter.
Example: if one converter of one module is in alarm, then the led will turn to orange.
4

AC out
Clicking the magnifier will bring the user to all measurements regarding AC Out.
Regardless of the system configuration (1P, 3P), displayed power is the total amount of power fed to
the load.
Power is expressed in both KW and KVA and the Power Factor (PF) is computed.
5

Gauge
In a 1P output system, the gauge depicts the percentage of power used in VA.
In a “more than 1P” system, the gauge depicts the “worst case”, i.e. if the system is unbalanced, it
show the most loaded phase.
6

MBP
MBP is configured in the system.
7.3.3 Toolbar
The toolbar is always accessible and provides quick access to following pages:
• Events page
The events icon has the colour of the highest priority alarm currently present in the system:
ƒ
Green: system healthy, no event present.
ƒ Grey: at least one event is present in the system but not configured as major or minor.
ƒ
Orange: at least one minor event present in the system. No major event but other events could be present
also.
ƒ Red: at least one major event is present in the system. Other event or minor events could be present.
If more than one event is present, regardless its level, a counter is present on the icon. It displays the
total number of event currently present in the system.
• Connections
This brings to digital input and relays status. For configuring these inputs and outputs, it’s in configuration
section.
•
Files
This leads to files management page. Files such as configuration, update, log download.
• Parameters
The parameters page allows user to change every parameter related to the system.