If the Ext wishes to rejoin the conference of two junction lines, the same can be done by dialing #9 from the Ext.
.
KTS features
.
Various features of the KTS can be set through menu driven process to be followed on the display of the KTS.
Process
:
Press “PROGRAM” key once for following settings:
Ring Tone Change, Back Light setting , Single Tone, Auto Attendant
– One Message/3 Message/Message record,
Extension Lock, Reset KTS, Howler Tone setting (Prompt Tone) = Yes/No, Quick Transfer mode setting, Clear
Charge List, Date/Time, Alarm Setting, Background Music.
Press
“PROGRAM” key twice for following settings:
System Programs - enter Password to proceed
:
System Parameters
– Junction Reserve Time ( It relates to Call Park time), No Answer Transfer Time, Call
Operator=Yes/No, Key Phone Monitor=Yes/No, Absent/Busy Ring= Yes/No, Absent/Busy Transfer=
Yes/No, CO(Junction) Line Transfer/No Answer Call Back= Call Back Operator/Give Up, CRBT (Company
Message in place of Ring Back Tone)= Disable/Transfer Operator/Group 1,2,3,4/ringing, Weekend setting=
Monday Workday, Monday Weekend, Office Code set= * / #, Add 2 digits to CLI, Auto Attendant =
Both/Night/Day, Day Start Time= Start Time/End Time, Day & Night Mode = Auto / Manual, Charge Mode=
Delay/Reversal, Night Mode Door Phone Ring, Day Mode Door Phone Ring, Door Phone setting,
CLI signal for incoming calls= Auto/FSK & DTMF/ DTMF/FSK, CLI send mode = FSK/DTMF, Auto Attendant
No Answer = Free CO (Junction)/transfer operator/Group1,2,3,4, Operator= 01 to 32, Hook Flash
Time, modify Password, System reset, Reset default.
Extension Parameters
– Hot Line, Night Access CO (Junction access to Extensions in Night mode), Day
Access CO (Junction access to Extensions in Day mode), Night Service Grade (Night Mode Junction access),
Day Service Grade (Day Mode Junction access), Private Password (Walking Class of service), Flexible
Numbering, Call duration (Auto Call Disconnection), Access Special Calling Out Number (Access code for
Special trunk in LCR), B Group Restriction (Denied Table B), A Group Restriction (Denied Table A), Dial Out
Mode (Hot Line), Extension Group setting.
CO (Junction) Line Parameters
– NHT CO CA In (Junction Ring in Night Mode), DAY CO CA IN (Junction
Ring in Day Mode), SEPC CO PREFIX (LCR starting codes), NOR CO OUT NUM (Access code of normal
Junctions), SPEC CO OUT NUM (Access code for Special Junctions), SPE CALL IN/OUT (Special Junction =
In Outgoing), NOR CALL IN/OUT (Normal Junction = In Outgoing), NOR BUSY U SPE (Allot
Special Junction when Normal Junction are busy), SPE BUSY U NOR (Allot Normal Junction when Normal
Special are busy), ROUTE SET (LCR = Manual / Auto / Off), INIT ROUTE (Initialize Routing i.e., LCR = YES /
NO), LCR CO GROUP, EN / DI CO LINE (Enable / Disable Junction), CO. OP. MODE (Auto Attendant Mode),
CO. USE MODE (Junction Access in Circular / Sequential Mode).
Press “PROGRAM” key thrice for following settings:
To assign DSS keys.
Press “PROGRAM” key 4 times for following settings:
To enter Memory dialing codes of the PBX / KTS
Note:
In the above programming, “HOLD” is used for Saving the program and “HANDS-FREE” key is used for Exiting as
various stages.
.
LCR (Least Call Routing)
.
This feature allows the user to dial out telephone numbers through the cheapest Junction line depending on whether the call will
be cheaper through a Particular Service provider line or though GSM line.
Example: If Junction number 1 has Telephone line with package having low cost of Mobile calls then PBX will route all calls having
mobile numbers through Junction number 1.
It can be operated in following two modes
:
Manual LCR Mode
Auto LCR Mode
Manual LCR Mode
In this mode, the user can pick particular Junction lines (called Special Junctions) to make Junction calls. In this case the user has
to select Normal Junctions or Special Junctions while dialing out.
Auto LCR Mode
In this mode, the user simply dials the required Telephone number and the PBX dials out on the cheapest available Junction line
for that Telephone number.
Programming procedure
Dial #
0000 + 0700 # - To make all Junction lines as normal.
This is the default setting.
Dial #
0000 + 0710 # - To enable Auto LCR mode
Dial #
0000 + 0711 # - To disable Auto LCR mode
Dial #
0000 + 0720 # - To enable Manual LCR mode
Dial #
0000 + 0721 # - To disable Manual LCR mode
Dial #
0000 + 0730 # - PBX will allot a normal Junction line if the Special Junctions are busy.
Dial #
0000 + 0731 # - PBX will give engaged tone if the if the Special Junctions are busy.
Dial #
0000 + 0732 # - PBX will allot a Special Junction line if the Normal Junctions are busy.
