Dial # 61
– to know the last 3 digits
Hear tones denoting 3 digits of Extension number.
Example
:
If the extension number is 601, you will hear 6 Tones, 10 Tones and then 1 Tone with a gap of 1.5
secs. 6 Tones indicate digit 6. 10 Tones indicate digit number 0 and 1 Tone indicates digit 1.
From KTS Extension
Lift H 6 + Press Up/ Down arrows of Navigation Key
.
CLI (Calling Line Identification)
.
The incoming Junction call telephone number is displayed on the LCD of the CLI phone on which the defined Junction call rings.
This feature will work with Telephones having CLI feature.
.
CLI Transferable / Internal CLI
.
When a Junction call is transferred from an extension to another extension, the external telephone number is displayed on the LCD
of the CLI phone. When an extension calls another extension, Extension number is displayed on the LCD of the CLI phone.
.
CLI
– Digits addition
.
Some CLI Telephones cannot display less than 4 digit numbers. In that case if the PBX extension numbers are less than 4 digits
then additional dummy numbers need to be added by the PBX.
Procedure
:
Dial #
0000 + 180 KK #
Where KK = Any 2 digit
To Disable dial #
0000 + 180 #
Note:
The above programming is true for SLT as well as KTS. However, KTS has an option to do the above through another
process given under the heading ‘KTS Features’.
.
CLI Receiving Mode (DTMF / FSK / Auto)
.
The system senses CLI on Junction lines in DTMF mode or FSK mode or it can be programmed in auto mode to detect either of the
two.
Procedure
:
Dial #
0000 + 1812 # - for FSK mode
Dial #
0000 + 1813 # - for DTMF mode
Dial #
0000 + 1814 # - for Auto Detection mode
Dial #
0000 + 1815 # - for always FSK & DTMF mode
Default: Auto Detection mode.
Note:
The above programming is true for SLT as well as KTS. However, KTS has an option to do the above through another
process given under the heading ‘KTS Features’.
.
CLI Transmitting Mode (DTMF / FSK)
.
The PBX generates CLI on Extensions in FSK mode in default.
For other modes, Dial #
0000 + 1811 # - for DTMF mode
Dial #
0000 + 1810 # for FSK mode
Note:
The above programming is true for SLT as well as KTS. However, KTS has an option to do the above through another
process given under the heading ‘KTS Features’.
.
Computer Connectivity
– for Call Logging & Call Voice Recording
.
following features can be availed when PBX is connected to a Computer & a software is loaded
:
PBX Programming
(Most of the Programming that can be done from Extension, can also be done through this
software).
Hotel management
(Features like Check-In / Check-Out, etc)
Call Details recording
Call Conversation recording
(If the PBX is with Door Lock operation then this feature cannot be used.)
The PBX can be connected to a PC by installing optional “PC Interface Card”. PBX is connected to the PC through a “RJ to RS232 Lead” (explained
under the heading “Installation”).
A software is loaded in the PC which can work in the back ground while it is being used for other applications.
The PC then records all the call details and the user can see them with various filter options.
The PBX also has memory to store call details of up to 3,000 calls. This helps in storing the data when the PC is down or not connected.
As soon as the PC is connected, the stored call details get transferred from the PBX to PC & are deleted from the PBX memory.
For recording of Call Voice, connect the ”Broadcast” socket of the PBX to MIC point of the PC (Refer heading “Installation”).
Refer “PC Interface Software” Manual for assigning Extensions / Junctions for conversation recording.
Any number of Junction or Extensions can be programmed for recording. However, PBX will record one call at a time. In case there are more than
1 conversation going on, the PBX will record the first initiated call.
Note:
All programing of the PBX can be done from the PC as well as SLT. However, programming through PC is more convenient.
.
Conference / Junction to Junction Call Transfer
.
The PBX supports three type of Conferencing
:
Between 2 Extension & 1 Junction
Between 1 Extension & 2 Junction
Between 2 Junction
