Sequential When an extension dials 9, the PBX will allot Junction numbers 01.
Next time any Extension dial 9 and if Junction 01 is free then Junction 01 will be allotted.
Junction number 02 will be allotted only when Junction 01 is engaged.
Programming
:
To program in Circular mode
Dial #
0000 + 0620 #
To program in Sequential mode
Dial #
0000 + 0621 #
.
Junction Access Control
.
Every Extension can be programmed to access one or all of the 8 Junction Lines.
Every Extension can be programmed to access one or all of the 3 Junction Lines.
The access to each Extension can be different in Day mode and Night mode.
Procedure
:
Dial #
0000 + 70 J NN X # (For Day Mode access)
Dial #
0000 + 71 J NN X # (For Night Mode access)
Where, J = 1to 9 representing the 1
st
to 8
th
Junction Line.
NN = Last 2 Digits of Extension Number
X = 0 to allow Junction access
1 to Disallow Junction access.
Dial #
0
000 + 70 J X # (To allow/disallow all extensions to access “J” Junction in Day Mode)
Dial #
0000 + 70 NN 2 # (To allow “NN” extension to access all Junctions in Day Mode)
Dial #
0000 + 70 NN 3 # (To disallow “NN” extension to access all Junctions in Day Mode)
Dial #
0000 + 71 J X # (To allow/disallow all extensions to access “J” Junction in Night Mode)
Dial #
0000 + 71 NN 2 # (To allow “NN” extension to access all Junctions in Night Mode)
Dial #
0000 + 71 NN 3 # (To disallow “NN” extension to access all Junctions in Night Mode)
.
Junction Dialing Controls
.
Junction dialing facility can be controlled Extension wise as below
:
Dial #
0000 + 44 L # (To assign “L” Value to all the extensions in Day Mode)
Dial #
0000 + 45 L # (To assign “L” Value to all the extensions in Night Mode)
Dial #
0000 + 44 NN L # (To assign “L” Value to NN extension in day Mode)
Dial #
0000 + 45 NN L # (To assign “L” Value to NN extension in Night Mode)
where, NN= Last 2 digits of Extension number.
L = 0 - The Extension can dial only the numbers starting with digits defined
in “Allowed Table”
1 - The Extension can dial all numbers.
2 - The Extension can dial all numbers except for ISD numbers.
3 - The Extension can dial all numbers except for STD numbers.
4 -
The Extension can dial all numbers except for the numbers starting with digits defined in “Denied
Table-
A”
5 - The Extension can dial all numbers except for the numbers starting with digi
ts defined in “Denied
Table-
B”
6 - The Extension cannot dial out but can make internal calls.
Default
:
All extensions are in L = 1 mode.
.
Junction Call Hold + Tr Making multiple calls
.
Procedure to transfer a Junction line to another extension
From SLT extension
While talking on a Junction line, FLASH and dial the Extension number while talking on the junction line.
From KTS extension
While talking on a Junction line,
press “Transfer” key + dial the Extension Number
Or
Simply press DSS key of the extension (This option would work in the PBX if
set in “Quick Transfer mode”.
R
efer “KTS Features” heading)
Now there can be following 4 conditions
:
1. When called extension lifts, calling extension can converse and then keep the Handset down. The Junction call will then get
transferred.
2.
Called extension lifts but doesn’t want to talk then he may keep the Handset down.
The call will come back to the transferring extension.
3. The called extension is ringing but not lifting the Handset. Keep the Handset down.
The call will ring on the called extension for 25 secs and if not answered it will ring back on the transferring extension.
Now if the Transferring extension is busy, the Junction call will be disconnected by the PBX.
If the user wants to disable this auto call back in case of No Answer while transferring a Junction call,
Dial #
0000 + 163 # (Now the Junction call will disconnect if the called extension does pick the call within 25 secs)