To clear this Table,
Dial #
0000 + 41 #
To clear a particular location of this table,
Dial #
0000 + 41 QQ #
.
Denied Table
– B
.
Numbers to be disallowed to extensions whose L = 5, are to be defined in this table.
For value of L refer “Junction Dialing
Controls”.
This table has 16 Locations.
Procedure
:
Dial #
0000 + 42 QQ ABCD#
Where QQ= 01 to 16 (16 Locations of the Table)
ABCD= The starting 4 digits of the Tel numbers to be denied to extension.
For less than 4 digits, dial # at the end of digits.
To clear this Table
, Dial #
0000 + 42 #
To clear a particular location of this table
, Dial #
0000 + 42 QQ #
.
Door Phone
.
Upto 4 Door Phones can be connected to this PBX.
Open the back cover of the Door Phone and connect 2 wires on the Terminal block.
These 2 wires are to be connected to the Extension port that has been programmed as Door Phone extension (from 603 to 632) of
the PBX.
To Set Extension as Door Phone
To define the Extension as the Door Phone extension, program as below:
Dial #
0000 + 80 NN 1 # (For the first Door Phone)
Dial #
0000 + 80 NN 2 # (For the second Door Phone)
Dial #
0000 + 80 NN 3 # (For the third Door Phone)
Dial #
0000 + 80 NN 4 # (For the fourth Door Phone)
Where, NN= 01
– 16 (Representing the Extension numbers from 603 to 632)
To make all the Door Phone extensions as a normal Extension, Dial #
0000 + 8000 #
Note
:
All Door Phone extensions get converted to normal extensions together.
Door Phone ring assignment
Day Mode Ring
To assign extensions to ring in Day mode when Door Phone calls,
Dial #
0000 + 82 NN #
Where, NN= 01
– 32 (Representing the Extension numbers from 601 to 632)
Repeat the program for upto 8 Extensions maximum.
To clear all Day Mode extensions for Door Phone calls, program as below:
Dial #
0000 + 82 #
Night Mode Ring
To assign extensions to ring in Night mode when Door Phone calls, program as below:
Dial #
0000 + 83 NN #
Where, NN= 01
– 32 (Representing the Extension numbers from 601 to 632)
Repeat the program for upto 8 Extensions maximum.
To clear all Day Mode extensions for Door Phone calls, program as below:
Dial #
0000 + 83 #
Default
:
Extension 601 and 602 are assigned Door Phone Calls in Day Mode as well as Night Mode.
Note:
Extensions cannot initiate call to talk to Door Phone ;
The above programming is true for SLT as well as KTS. However, KTS has an option to do the above through another
process given under the heading ‘KTS Features’.
.
Door Lock
.
Upto 2 Door Locks can be connected to this PBX. One Door Lock connection is built-in. Second Door Lock connection is Optional.
To set the Time duration for which the Door Lock circuit is to be operated, program as below
:
Dial #
0000 + 185 TT #
Where, TT= 01-99 (04 means 0.4 Secs)
Default
:
TT= 04
Operating Procedure
The door Lock can be operated in 2 modes.
1. While talking to the Door Phone
Press
1 to operate the 1
st
Door Lock
Press
2 to operate the 2nd Door Lock
2. Directly from the Programming Extensions:
Dial # 78 to operate the 1
st
Door Lock
Dial # 79 to operate the 2nd Door Lock
.
DSS Keys Setting
.
