Page 46
Option 5 – Criterion
Whilst in Custom Mode it is possible to change all the legislative criterion levels
as listed below: -
EAV
Exposure Action Value
ELV Exposure
Limit
Value
VDV EAV
Vibration Dose Value Exposure Action Value
VDV ELV
Vibration Dose Value Exposure Limit Value
Action Values
The point at which vibration exposure levels requires controlling to reduce the
risk to employees.
Limit Values
The maximum value that vibration exposure levels must not exceed.
Press
1
to toggle Criterion ON/OFF.
Press
2
to enter a new Exposure Action Value.
Press
3
to enter a new Exposure Limit Value.
Press
4
to enter a new VDV Exposure Action Value.
Press
5
to enter a new VDV Exposure Limit Value.
Enter the new value using the numeric keypad, for example enter
0250
for a
value of 2.50. The decimal point is applied automatically.
Use the
Left Arrow
key
to delete unwanted input or press the
OK
key to
accept the inputted value. An Invalid input will give an ‘
Out of Range
’ error
message.
Press
Soft Key 1
labelled
CANCEL
to discard any changes or
Soft Key 4
labelled
APPLY
to make any changes made.
Maximum inputs for each selectable display unit / dB reference are shown in
the following tables: -
Figure 47 – Custom Mode Criterion Selection
1. Criterion:
ON
2. Action:
0.50 ms
-2
3. Limit:
1.15 ms
-2
4. VDV Action:
9.10 ms
-2
5. VDV Limit:
21.00 ms
-2
09:16:02
26:08:11
CRITERION
09:16:00
26:08:11
CRITERION
APPLY
CANCEL
CANCEL
1. Criterion:
ON
2. Action:
_ . ms
-2
3. Limit:
1.15 ms
-2
4. VDV Action:
9.10 ms
-2
5. VDV Limit:
21.00 ms
-2
Press OK to accept
Numeric Entry Prompt
