Page 20
Switching Your Excieo Meter On/Off
To turn on your instrument press and hold the Power On/Off key
for
approximately one second. Your instrument will display the boot up screen with
an initialisation progress bar at the bottom of the screen. When initialisation is
complete, your meter will be ready for operation in Real Time mode with the
previously used settings.
To turn your instrument off press the Power On/Off key
at any time.
Confirmation will then be required by pressing the
OK
key or using Soft Key 1
labelled
CANCEL
to cancel the shut down request. Please be aware that the
Power On/Off key
is disabled whilst the instrument is recording. To
preserve your data always turn your instrument off using the Power Key.
Your Excieo meter is equipped with a battery indicator to easily identify the
approximate remaining battery charge. When the batteries are low and need
replacing, the
Time
,
Date
and
Battery Indicator
will start flashing. You should
then turn off the instrument and replace the batteries as soon as possible.
The instrument is also fitted with an Auto Shut Down feature should the
batteries run low and are not replaced. If recording and the Auto Shut Down
feature activates, your data will be saved with an Employee Name
‘Batt Low’
.
The battery indicator and its eight stages of graphical display are shown below: -
100%
0%
Figure 11 - Shut Down Screen
> ‘OK’ – SHUT DOWN <
CANCEL
09:00:20
26:08:11
SHUT DOWN
