Page 43
Option 2 –Timer
Measurement Time is setup whilst in real time mode but is used whilst
recording. If the option is turned ON then when a recording is started, its time
period is governed by the set measurement time period. The recording
automatically stops once the measurement time has elapsed.
Press
1
on the keypad to toggle Measurement Time ON /OFF.
Press
2
on the keypad to enter the Interval Time using the numeric keypad. The
maximum interval time permitted is 23:59:59 (hh:mm:ss). Invalid entries will
display an ‘
Out of range
’ message and return the value to its previous state. To
delete errors use the Left Arrow Key
.
Press
Soft Key 1
labelled
CANCEL
to discard any changes or
Soft Key 4
labelled
APPLY
to make any changes made.
Figure 43 – Toggle Measurement Time ON / OFF
1. Timer : [OFF]
2. Duration 00:01:00
09:14:02
26:08:11
MEASUREMENT TIMER
09:14:00
26:08:11
MEASUREMENT TIMER
APPLY
CANCEL
APPLY
CANCEL
1. Timer : [ON]
2. Duration
1. Timer : [ON]
2. Duration _ : :
09:14:04
26:08:11
MEASUREMENT TIMER
APPLY
CANCEL
Numeric Entry Prompt
Figure 44 – Measurement Duration Time Entry
