Casablanca Prestige, Руководство пользователя

Страница: 54 / 88

54 55
click " Add Project ".
A click on this button causes the conversion pro-
cedure to be carried out. The project is converted
and stored on the reserved section of the hard
drive.
The conversion procedure is what determines in
the end the picture quality of the finished DVD.
This process is speeded up considerably with the
help of a special hardware component. Because
of this, we have decided to offer you the highest
possible quality. The progress of the conversion is
shown by a progress bar and may, because of the
high quality, take some time.
Any pending creations are automatically carried
out before the project is added.
After you have created the project it appears in the
list in the lower function block.
( 15 ) The button next to " DVD Name " can be
clicked to bring up the keyboard so that you can
enter a name of your choice.
( 16 ) In this small window you are shown the
number of projects added (up to six), the total
running time, and the space used on the hard
drive (in percent).
(
17
) With a click on "
Title Info
" a screen appears
in which you can change the project title name. In
addition, you are shown the project runtime, its
picture quality, and its audio quality.
Six projects altogether can be written to a DVD.
The projects are allowed to have different settings.
( 18 ) A click on " Remove Title " causes a confirma-
tion warning to be displayed. Clicking there on
"
Ok
" causes the selected title to be deleted.
( 19 ) The background for the DVD menu can
now be set. The background can be monochrome
or colored. You can also use one of the supplied
pictures. Click on "
Title-menu Background " so
that the image pool (with which you are already
familiar) appears (section 3.3) and you can select
a picture by clicking (in sequence) on the "
Pro-
duct ", " DVD Arabesk ", " Type ", " Pictures "buttons.
Patterns and pictures from supplemental pro-
grams you have paid for can also be used if the
programs are installed.
( 20 ) Click on the button " Menu-Preview " and
you are in the menu that shows you the reference
pictures of the individual projects on the back-
ground you have selected.
(
21
) After you have completed all the previous
steps and have opened the DVD door of the
Casablanca Prestige , select the button " Write
DVD
".
The DVD drawer will open. Insert a DVD-R or
DVD-RW so the system can begin writing.
A progress bar informs you of the progress.
Note: very short videos may require a
disproportionately long time because about 20%
of the storage space is written even when less
data is to be written. The writing time takes a
minimum 20 minutes in length.
The DVD writer's read/write light is lit during
writing. It can happen that
Casablanca Prestige is
finished (the write window is closed) but the red
light is still lit.
In this case wait unit the light has
gone out before removing the disc! Otherwise
the disc can be damaged.
When Casablanca Prestige has finished writing
and the read/write light has gone out , you can
remove the DVD and try playing it in a playback
device. Most new DVD players accept DVD-R
media.
( 22 ) With DVD Arabesk you can make copies
from non-copy-protected DVDs.
Note: Some commercial DVDs are not copy-
protected, even though the manufacturer
expressly prohibits copying. DVD Arabesk cannot
tell the difference between such a DVD and a
DVD that you have burned yourself. Technically
speaking, the DVD can be copied. But this may be
illegal! We accept no liability in such cases. When
in doubt, ask the manufacturer of the DVD!
To copy, the source DVD is copied to the DVD
hard-drive space and from there written to a DVD
R or RW. The result is a 100% copy without loss.
This function enables you to copy your own
DVDs, if you need further copies after deleting
the project from the hard drive. Changes are then
no longer possible. The copies made are 1:1.
Reading in a DVD requires reserved space on the
hard drive’s DVD partition. Any projects in this