Casablanca Prestige, Руководство пользователя

Страница: 44 / 88

44 45
5.4 Recording
This screen is used to record your video footage
from your camera or deck onto the Casablanca
Prestige .
( 1 ) The red circle is used to start recording. Du-
ring recording a click on the trackball right button
has the same effect as pressing the stop button in
the small display You can start and stop recording
to not waste drive space with unwanted video. If
you want to divide up your recorded video ma-
terial, after recording proceed to the
Edit
screen.
You can find more information in section " 5.5
Editing " under splitting .
( 2 ) The selection button " Mode " offers you three
possibilities. " Normal : means a normal recording.
The setting "
Time
" activates the "
Time"
slider (see
item (3)), with which you can set the recording
duration exactly. After this time, recording is au-
tomatically stopped.
The setting "
Photo " is appropriate for single
pictures. Casablanca Prestige records about a
half second of material that is then extended as a
single image to the duration you have set (see (3)
"
Time ").
( 3 ) The " Time " slider is activated by the modes
Time and Photo .
The Time mode allows setting the duration for
the still scene up to 100 minutes.
In
Photo mode you can set the duration of the
still scene up to one minute.
You can always stop recording with the stop but-
ton, regardless of the time that has been set.
(
4
) When a new scene is recorded, the
Casablanca
Prestige will automatically name it (S1, S2 etc.).
Its name is displayed under the record button.
Clicking on the name brings up the keyboard
which allows you to give scenes the name you
choose.
( 5 ) This fields shows you how long the recorded
scene is.
( 6 ) The field Rem. shows you how much
time remains, meaning how much video can
still be recorded. This is not displayed during
recording; it is switched to a smaller display. This
amount is an estimate. The system calculates
the remaining time on the basis of the level of
detail of the material already recorded. The value
is not recalculated until the current recording
is finished. If the quality settings change, the
actual space may be slightly more or less than this
estimate.
( 7 ) Just like the video settings, this menu is su-
perimposed over the video. You can see the video
during recording and thus always decide whether
you want to digitize a sequence or not.
The symbol at the lower left with the two triangles
moves the panel to the upper edge. This is useful
if the panel happens to be covering important
parts of your material.
(
8
) If you don't need this menu during recording
(e.g. DV control) then you can minimize it with
this button to a much smaller panel. Then the
only buttons available are the buttons described
under (
7 ) and the button to return the normal
size record menu.
( 9 ) " DV control " is done with these five buttons.
You can directly control the connected DV device
through the i-Link interface. Please note, however,
that not every DV device is compatible, but you
will find that most of them are.
Seen from left to right, the buttons are used to:
stop the recorder, play, pause, rewind, and fast
forward.
Rewind and fast forward have three different
effects. Fast rewind or fast forward results if the
button is pressed while the recorder is in stop
mode. Slow rewind or slow forward results if the
button is pressed while the recorder is playing.
Clicking the button while the recorder is in
pause mode causes movement of a single frame
backward or forward.
( 10 ) The four menu symbols bring you directly
to the
Edit, Record/Edit, Video settings
, and to