Carver 42 SUPER SPORT, Руководство пользователя

Страница: 34 / 141

22 4127 • 42 Super Sport 4/06
DC ELECTRICAL SYSTEM SECTION 2
DC Control Center
The DC Control Center, located in the first cabinet on the aft starboard side of
the salon, manages the power supply to most of the boat’s 12-volt equipment,
except for the equipment on the bridge.
To provide power to this breaker panel:
1. Turn the Accessory Battery master disconnect switch to the “ON” position.
2. On the Safety Breaker Panel, switch the Main - One and Main - Two circuit
breakers “ON.”
The DC Control Center contains the switches, gauges and circuit breakers
described in the following pages.
Ammeter
The ammeter indicates the amount of current that is being drawn by the
components listed on the DC Control Center.
Bilge Blower
Use this switch to operate the four bilge blowers. To activate this switch, first
switch the four Bilge Blower circuit breakers “ON.”
Bilge Blower (1 - 4)
These four breakers control the flow of electricity to the Bilge Blower switch at
the helm and on the DC Control Center. To supply power to these switches,
switch these breakers “ON.” Use the Bilge Blower switch to manually operate
the bilge blowers. The bilge blowers also operate automatically when the
starboard engine ignition switch is turned ON.
Bridge Accessories
This breaker controls the flow of electricity to any aftermarket accessories
installed at the bridge helm. Switch this breaker “ON” to activate these
accessories. Refer to the accessories’ manuals for information on operating
the accessories.
Bridge Electronics
This breaker controls the flow of electricity to the Bridge Breaker Panel.
To supply power to the panel, switch this breaker “ON.” Refer to
Section 2 - Bridge Breaker Panel for information on this panel.
DC CONTROL CENTER