Carroll Spirit Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 110

Carroll Spirit Скачать руководство пользователя страница 79

Spirit™ Bed Owner’s Manual – 1-70-001 – Rev D

© Carroll Hospital Group Inc.

Page 79 of 110

10.

Leaving the calibration masses in the bed center, place the bed in the maximum Trendelenburg position.

Press and hold the TREND button. Press ENTER button once the bed automatically stops in the maximum

Trendelenburg position. A confirmation “chirp” will sound to indicate that this step was successful.

11.

Leaving the calibration masses in the bed center, place the bed in the maximum reverse Trendelenburg

position. Press and hold the rev.TREND button. Press ENTER button once the bed automatically stops in
the maximum reverse Trendelenburg position. A confirmation “chirp” will sound to indicate that this step

was successful.

12.

After successful completion of the calibration procedure, a

message will be displayed. Press ENTER button to
continue. Press and hold the TREND button to level bed.

The bed will stop automatically when the mattress deck is

level with the floor. The scale has now been successfully

calibrated and the bed is now ready for use.

If the bed detects a problem during any stage of the scale

calibration procedure, a warning message will be displayed.

1.

Press ENTER button to acknowledge calibration

procedure failure.

2.

The display will automatically return you the

beginning of the calibration procedure.

3.

Press ENTER button to start calibration procedure
again or allow display to time out or remove and

replace footboard to abandon scale calibration

attempt at this time.

IMPORTANT: If the calibration procedure fails a second
time, the bed may require service and/or component

replacement.

WARNING

The Spirit™ bed may shift during Trendelenburg or Reverse Trendelenburg activation.
Initiate Trendelenburg or Reverse Trendelenburg only after the Central “Lock & Steer” system has

been put in the “BRAKE” position.

«
...
77
78
79
80
81
...
»

Содержание Spirit















































































































Отзывы:

Нет отзывов