Carroll Spirit Скачать руководство пользователя страница 49

Страница: 49 / 110

Spirit™ Bed Owner’s Manual – 1-70-001 – Rev D

Page 49 of 110

3.7

Optional 4” Bed Extension Kit (Spirit Plus™ and Spirit Select™)

To accommodate the physical needs of taller patients, Carroll Hospital Group

offers an optional extension kit that will increase the length of the mattress

deck by 4 inches (101.6 mm).

*Tools not included

Your extension kit will include:

•

Metal extension pan

•

4” foam mattress bolster (optional)

•

Fasteners: two 5/16-18 X 2” long hex head screws, two 5/16-18 hex

locknuts, two 5/16 flat washers

Lift the foot section of the

mattress deck to access the
footboard bracket and cables.

Rotate foot section of the

mattress deck towards the head

of the bed until it comes to rest.

Extend the footboard cable so

that there is sufficient slack to
accommodate the 4” addition.

To perform this step, it may be
necessary to cut some of the plastic

tie wraps. Replace and trim all cut

plastic tie wraps after the footboard

cable has been sufficiently slackened.

Using a 1/2” socket wrench,

loosen and remove the two hex
head screws that attaches the

footboard bracket to the bed

frame.

These fasteners will not

be reused.

Slide the bracket back 4”. Align
the holes in the footboard bracket

with the corresponding holes in

the main rail of the bed frame.

Place one 5/16 flat washer on a
hex head screw and insert as

shown above. Repeat on other

side of the bed

Place one 5/16 flat washer over
threads of the hex head screw

and start a 5/16-18 hex locknut.

Tighten using two 1/2" wrenches

or socket wrenches. Repeat on

other side of the bed.

Remove the two foot-end Corner
Mattress Keepers. Loosen and

remove the four 1/4-20 X 5/8”

long carriage bolts and nuts using

a 7/16” wrench or socket wrench.

These fasteners will be reused.

Install the metal extension pan
using the fasteners that were

removed in the previous step.

Tighten with a 7/16” wrench or

socket wrench.

Do not over

tighten fasteners. See Corner

Mattress Keeper section on page

32 for details.

Place the foam mattress bolster
into the extension pan.

Your extension kit is now ready for
use.

Содержание Spirit















































































































Результаты поиска

Содержание Spirit

Отзывы:

Carroll Spirit, Руководство пользователя, Страница: 49 / 110

Результаты поиска

Содержание Spirit

Отзывы: