Carroll Spirit Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 110

Carroll Spirit Скачать руководство пользователя страница 35

Spirit™ Bed Owner’s Manual – 1-70-001 – Rev D

© Carroll Hospital Group Inc.

Page 35 of 110

3.1.1

Bed Mobilization & Stabilization

Bed Mobilization

The bed is mobile when the Central “Lock & Steer” pedal is in either the “NEUTRAL” or “STEER” position.
Use either of these two pedal positions depending on the situation, when bed mobility is needed.

Enable “Steer”

Fully depress the right side of the
Central “Lock & Steer” pedal at either
end of the bed. Pedal actuation
mechanism should make an audible
engagement when switching between
modes.
IMPORTANT: Depending upon the
orientation of the castors, it may be
necessary to roll the bed sideways, in a
back and forth motion, at the foot end
of the bed until the steering casters
become engaged in the “STEER” mode.

Put the bed into “Neutral”

Depress or lift the Central “Lock & Steer” pedal with your foot until the
pedal is level. Pedal actuation mechanism should make an audible
engagement when switching between modes.
The bed can be put in “NEUTRAL” regardless of caster orientation.

Bed Stabilization

The bed is stable when the Central “Lock & Steer” pedal is in the “BRAKE” position. Use this pedal
position whenever the bed is left unattended or when the bed needs to remain stable.

Apply the “BRAKE”

Fully depress the left side of the Central “Lock & Steer” pedal at either
end of the bed. Pedal actuation mechanism should make an audible
engagement when switching between modes.
The “BRAKE” can be applied regardless of caster orientation.

WARNING

DO NOT to move the bed until the side rail assemblies have been rotated completely to the

raised/closed, UP or “GUARD” position and the locking/latching mechanism has engaged. For

complete instruction see Side Rail Operation on page 51.

NOTE:

When the “NEUTRAL” mode is activated properly, the bed should move freely without any

unusual noises. If any clicking noises are heard when in the “NEUTRAL” position, stop and check

that the Central “Lock & Steer” pedal is level. Adjust, if necessary.

«
...
33
34
35
36
37
...
»

Содержание Spirit















































































































Отзывы:

Нет отзывов