CareFusion LTV 1100, Руководство по обслуживанию

Страница: 342 / 352

p/n 18603-001, Rev. J LTV
®
1200, 1150, and 1100 Ventilator Service Manual Page E-15
General Tools:
The following general tools are required to perform various procedures on the LTV
®
1200, 1150, and
1100 ventilator;

Air supply, (0-50 cmH
2
O)

Allen wrench, 7/64”

Amp meter, 10 amp to 60 Hz

Compressed O
2
source (0-80 PSI regulator)
(LTV
®
1200)

Compressed gas source (0-50 cmH
2
O
regulator)

Dental pick

Drill Bit, 3/16”

Drill

Multi-Meter, Digital

Nut drivers, 3/16”, 1/4”, 1/2” & 13mm adapters
for torque wrench

O
2
Analyzer (calibrated)

O
2
Supply (0-80 PSIG) (LTV
®
1200)

O
2
Inlet connector (LTV
®
1200)

Pliers, needle nose

Pop Rivet tool
107

Pressure gauge (FSD >80 PSI) (LTV
®
1200)

Pressure manometer (0-100 cmH
2
O)

Screwdriver, Phillips with torque meter

Screwdriver, Straight tip

Spirometer (calibrated)

Test Lung (2 Liter or other large-compliance
reservoir) or

Test Lungs (2 x 1 liter or greater)

Cable tie tool

Torque Screwdriver, 120 in-oz.

Variable DC voltage source (10 Amp)

Wrist strap, grounded anti-static

Y-connector for test lungs
Unique Tools:
The following unique tools are required to perform various procedures on the LTV
®
1200, 1150, and
the 1100 ventilator and are available from CareFusion separately, or as part of the Maintenance and
Calibration Kit, P/N 11566;
107
Pop Rivet tool capable of setting .114” diameter shaft, Pop Rivets.
108
DISS/ NIST adapter required to comply with some international gas fittings (not included in kit, P/N 11566).
109
In the European Union, Loctite® 8104 may be substituted as an equivalent compound.
110
O
2
Sampling Tube, P/N 10544, ~10.0” long, 0.125” O.D. X 0.079 I.D. clear polycarbonate tubing (not included
in kit, P/N 11566).

Calibration Syringe Assembly P/N 11471

DISS to NIST fitting for high pressure O
2
port P/N 10702
108

Driver, Torque Dial Indicator
P/N 11574

External Battery Test Cable Assembly
P/N 11474

Flow Valve Insertion Tool
P/N 14206

Internal Battery Test Cable Assembly P/N 11472

Lubricant, Silicone Compound P/N 10123
109

O
2
Sampling Tube
P/N 10544
110

Patient Assist Cable, Normally Closed
P/N 10779

Patient Assist Cable, Normally Open P/N 10780

Pinch Clamp P/N 11529

Power PCB Removal Tool
P/N 11599

Service Cable Assembly
P/N 11485

Stepper Motor Calibrator P/N 10871

Tube Adapter, 22mm P/N 10696

Turbine Pressure Test Adapter Assembly P/N 11567