CanyCom S100 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 66

CanyCom S100 Скачать руководство пользователя страница 52

- 46 -

7

Maintenance

7.8.5 Fun Belt Tension

Fan belt

If  the  tension  of  the  cooling  fun  belt  is
small,  the  belt  is  slipped  and  not  only
the  cooling  capacity  of  the  engine  is
lowered  but  also  the  service  life  of  it  is
shortened.

3677M-0704-110

Inspect the tension after the engine is
stopped.

Inspection / Adjustment

7.8.5 Track Tension

1. Open the engine cover.

2. Press the center of the cooling fan belt by finger to

check for the tension of the belt.

Deflection: About 7 mm at force of about 5 kg

3. If the deflection does not come within a reference

value specified above, loosen the mounting bolt, and
move the alternator to adjust the tension of the belt.

Clawler tension bolt

Lock nut

Loose track tension can cause the tracks to come
off the machine, causing damage to the machine
and possibly serious injury or death to the opera-
tor or bystanders. During the first 100 hours of
use, the tracks stretch and the track tension loos-
ens. Check track tension during the pre operation
inspection and as part of monthly inspection, as
specified in the Regular Inspection Chart.

1. Stop the machine on level ground.

2. Jack up the front and rear of the chassis to raise the

crawler on one side and make it horizontal to the
ground surface.

3. Loosen the lock nut of the crawler tension bolt.

4. Rotate the crawler tension bolt to adjust the clearance

between the crawler and the frame to 75 to 80 mm.

«
...
50
51
52
53
54
...
»

Содержание S100



































































Отзывы:

Нет отзывов