CanyCom S100 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 66

CanyCom S100 Скачать руководство пользователя страница 13

- 7 -

Rules for Safe Operation and Maintenance

3

Work with an Observer in Dangerous

Situations

3-059

When operating the machine where there is poor vis-
ibility, rugged terrain, hills, or limited maneuvering room,
use an observer to help direct the machine 's movement.
The observer should be able to see the machine and its
immediate surroundings, and should use pre-arranged
signals to direct the driver's actions.

Precautions on Slopes

Use the Engine Speed to Help Brake when

Driving Down a Slope

3-008

Before driving down a slope, stop the machine temporar-
ily  and  lower  the  speed  of  the  engine,  and  drive  down
the  slope  at  a  low  speed.    Let  the  engine  speed  help
decelerate the machine.   Travel at a low speed on  wet
steel  plates  and  in  muddy  places.    The  machine  may
slip  even  on a gentle  slope,  causing a serious  accident.
Stopping suddenly when driving down a slope can throw
the operator from the machine or make the machine turn
over, causing serious injury or death.

Observe the Machine

’s Load Limit on a

Slope

15～20

Driving on slopes can be dangerous. This is particularly
true when you are driving with a load. Do not exceed

500kg, when traveling on slopes of 15° to 20 °. If you

must drive on slopes of more than 20 °, the machine
must not carry a load.

3-008

Do Not Drive Across a Slope to Drive on the

Slope

3-009

Always travel straight up and down a slope.  Never travel
across  a  slope  or  along  a  contour  line.   Driving  across
a steep slope or along a contour  line  is dangerous  and
may cause the machine to tip over causing serious injury
or death.

Never perform turning operation on a slope. If a route
must be changed unavoidably, move the machine to
level ground temporarily before turning.

«
...
11
12
13
14
15
...
»

Содержание S100



































































Отзывы:

Нет отзывов