CanyCom S100 Скачать руководство пользователя страница 17

Страница: 17 / 66

- 11 -

Component Names and Functions

1 Charge lamp

2 Cooling water tempera-

ture lamp

3 Oil lamp

4 Hour meter

5 Horn switch

6 Ignition switch

7 Steering lever

8 Clutch lever

9 Parking brake lock lever

10 Parking brake pedal

11 Throttle lever

12 Dump lever

13 Turn lever

This displays the condition of the battery charge.

When the ignition switch is turned to the [I] position, it lights up, and if the
condition is normal, it will go out after the engine starts.

This lights up when the engine cooling water temperature rises
abnormally (overheats).

This shows if the engine oil pressure is normal. When the engine-starting
switch is turned to the [ I ] position, it lights up, and if the conditions are
normal, it will go out after the engine starts.

This displays the total number of hours that the machine has been work-
ing in units of 0.1 hour.

Press this button to sound the horn. This is used when warning during
traveling and signaling during operation.

Turn this key to start and stop the engine.

This is used to switch the traveling direction of the machine (to forward or
backward) and turns the machine.

This is used when the stability of the engine is poor in winter or in cold
areas.

To lock the brake pedal, pull this lever toward you with the brake pedal
depressed when the machine is at a standstill.

This is used to safely park the machine.

This is used to increase or decrease the speed of the engine.

This is used to raise or lower the dump body.

This is used to rotate a bed.

Содержание S100



































































Результаты поиска

Содержание S100

Отзывы:

CanyCom S100, Руководство оператора, Страница: 17 / 66

Результаты поиска

Содержание S100

Отзывы: