CanyCom S100 Скачать руководство пользователя страница 38

Страница: 38 / 66

- 32 -

Maintenance

Item

Content of inspection

Inspection

interval

Remarks

cks

rti

lly

ach

ine
s

syst

Machine

frame and

body

• Check for cracks, deformities, or

corrosion.

No cracks, noticeable
deformities, or corrosion.

○

• Check for missing or loose bolts

or nuts.

There must be no loose or
missing mounting bolts or nuts.

○

Cover

• Check for abnormality in lock open-

ing or closing condition of covers.

There must be no abnormality
in lock or opening.

○

Display plate

(mark)

• Check that display plates specified

for structural regulations and other
precaution or instruction plates

are installed without damage.

Must be installed without
damage.

○

Horn

• Operate the switch to check that

the horn operates correctly.

Must operate correctly.

○

Lubrication

• Check lubrication at all parts.

Must be properly lubri-
cated.

○

Lubrication:
See page: 37

Load deck

support bar

• Raise load deck and check condi-

tion of support bar when fixed.

Must be installed
securely.

○

• Check for curvature or deformi-

ties.

No noticeable curvature
or deformities.

○

• Check for cracks or damage in mount

of load deck support bar. Use a flow
detector to check for cracks.

There must be no
cracks or damage.

○

Overall test

• Operate travel and loading system

and check function.

All system must work correctly,

there must be no abnormal

noise, abnormal vibration, or

abnormal generation of heat

○

7.2 Fuel, Lubricant, and a Cooling Water Chart

Item

Interval

Содержание S100



































































Результаты поиска

Содержание S100

Отзывы:

CanyCom S100, Руководство оператора, Страница: 38 / 66

Результаты поиска

Содержание S100

Отзывы: