CanyCom S100 Скачать руководство пользователя

Страница: 40 / 66

- 34 -

7.4

Adding Oil

Maintenance

● Insufficient or improper lubrication reduces performance and may cause the

machine to break down, shortening the life of the machine. Always keep
machine filled with the right amount of designated good quality oil.

● Always check remove and add oils on a horizontal surface after stopping the

engine.

7.4.1 Engine Oil

Stay-bar

Dipstick

Oil filler cap

Inspection / Adding

1. Open the engine cover, and lock it with the stay-bar .

(See page 15).

2. Extract the oil dipstick, and wipe off oil with clean cloth.

3. Insert the oil dipstick, and pull it again.

4. Check the oil level. If it is low, add oil to between the

upper limit and lower limit positions on the oil dipstick.

5. Visually check oil for amount and dirt. If oil level is

low or dirty, change all oil.

Line (upper)

Line (lower)

Avoid contact with high temperature oil to

avoid burns.

Dispose of the drained oil properly.

Oil drain plug

3677M-0704-030

Replacement

1. Prepare a suitable container to collect drain oil.

2. Remove oil drain plug and drain oil from crankcase.

3. Replace the drain plug firmly.

4. Open the oil cap and add proper amount of designated oil.

5. Replace the oil cap firmly.

Содержание S100



































































Результаты поиска

Содержание S100

Отзывы:

Похожие инструкции для S100

Бренды по названию

Популярные бренды

CanyCom S100, Руководство оператора

Результаты поиска

Содержание S100

Отзывы:

Похожие инструкции для S100

Бренды по названию

Популярные бренды