CanyCom S100 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 66

CanyCom S100 Скачать руководство пользователя страница 26

- 20 -

6

Operation

6.2.3 Starting in Winter or in Cold Areas

If the engine is hard to start in winter or in cold areas (at an atmospheric temperature of

0°C or below), start the engine following the procedure below. The load on the battery
will be reduced.

1. Push the clutch lever to the [

(OFF)] position.

Clutch lever

Clutch lever

OFF

2. Depress the parking brake pedal.

3. Push the throttle lever to the [

(HIGH SPEED)]

position.

4. Insert the engine key in the ignition switch,

and turn it to the [

(PREHEAT)] position to warm-

up the engine.

5. Turn the key in the ignition switch to the[

(START)]

position to start the engine. (When the engine starts,

release the key immediately. The key will automati-

cally return to the [

(ON) position.]

6. Check that the warning lamps (oil lamp, charge lamp,

and cooling water temperature lamp) are off.

(Reference: See page 19)

7. Push the clutch lever to the [

(ON)] position.

8. Continue the warming-up operation for about 5 min-

utes under no load.

«
...
24
25
26
27
28
...
»

Содержание S100



































































Отзывы:

Нет отзывов