CanyCom S100 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 66

CanyCom S100 Скачать руководство пользователя страница 2

Warning Words Used in This Manual

To indicate the level of danger (or the degree of the failure), the following four signal

words are used to identify the safety messages in this manual. Their meanings are as
follows.

Signal word

Meaning

Indicates an imminently hazardous situation which, if not avoided by following
these instructions and precautions, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided by following
these instructions and precautions, could result in death or injury.

Indicates a potentially hazardous situation which, if not avoided by following
these instructions and precautions, may result in minor or moderate injury.

This word is used for precautions that are recommended or to emphasize the
importance of information.

Notice to Users and Maintenance Personnel

Thank you for purchasing this machine.

Always be sure to read and understand this manual thoroughly before using your

machine. This will enable you to use it correctly.

The machine can be very dangerous if the safety  precau-
tions  in  this  manual  and  on  the  labels  attached  to  this
machine are not followed.   Always follow the instructions
and  safety  precautions,  or  serious  injury  or  death  could
result.

This machine should only be used for its intended pur-
pose: hauling and dumping.

Any other use could be dangerous.

Also driving this machine on a public road or a road
regarded as a public road may be illegal.

Do not modify this machine. Also do not remove the safe-
ty cover of the body before running. A serious accident
could result.

«
1
2
3
4
...
»

Содержание S100



































































Отзывы:

Нет отзывов