CanyCom S100 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 66

CanyCom S100 Скачать руководство пользователя страница 20

- 14 -

6

6. Operation

Operation

• Before reading this section, be sure to read Section 3 "Rules for Safe Operation and

Maintenance" (see pages 5 to 9).

• When operating the machine, always follow the instructions in this section. Do not operate the

machine unless you are familiar with the operation of all controls and safety devices.

6.1 Preparation Before Operation

6.1.1 Adding Fuel

• When adding fuel, keep open flames (lighted cigarettes, etc.) away from fuel

and engine. Flames will cause the fuel to ignite.

• Always stop the engine before adding fuel.

• Do not overfill so that fuel spills out of filler cap. Wipe up any spillt before

starting engine.

Fuel gauge

Checking fuel level

Visually check the fuel level gage. If fuel is low,

open the fuel tank cap, and add fuel.

Adding fuel

1. Open the fuel tank cover.

3677M-0601-060

Fuel tank cover

Fuel tank cap

2. Open the fuel tank cap, and add fuel.

3. Replace the fuel tank cap.

4. Replace the fuel tank cover.

Fuel to use: Light oil

Fuel tank capacity: 15.0 liters

Take extreme care so that a hand is not caught by the fuel tank cover.

«
...
18
19
20
21
22
...
»

Содержание S100



































































Отзывы:

Нет отзывов