CanyCom S100 Скачать руководство пользователя

Страница: 12 / 66

- 6 -

3-005

Rules for Safe Operation and Maintenance

Do Not Drive Recklessly

Do not operate this machine when under the influence of
alcohol or when fatigued. No one under age 18 should
operate this machine.

Do Not Start, Accelerate, Turn, or Brake Quickly

Maintain Safe Speed

When driving the machine, always drive at a safe

speed suitable for the load in the dump body and the

conditions of the road surface and grade of the road.

3-007

Precautions of Crumbling Ground

Beware of driving trenches and banks. There is a

danger of the ground crumbling due to the machine

weight. If travelling on soft ground, drive slowly and

safely.

3-060

No Quick Starting Acceleration, Turning or

Braking

3-006

Drive safely and avoid sudden changes of speed or

direction. Make sure the area around the machine is

safe for driving. Do not make sudden maneuvers or

turn sharply when driving on soft or wet ground; this

can cause the machine to lose traction or turn over.

Содержание S100



































































Результаты поиска

Содержание S100

Отзывы:

Похожие инструкции для S100

Бренды по названию

Популярные бренды

CanyCom S100, Руководство оператора

Результаты поиска

Содержание S100

Отзывы:

Похожие инструкции для S100

Бренды по названию

Популярные бренды