Cantel Medical MEDIVATORS CER OPTIMA, Руководство пользователя

Страница: 52 / 70

52
• Combination MANUAL “WASH, AIR and/or ALCOHOL” Cycle : Sets the reprocessing cycle to
perform any combination of Wash, Air and Alcohol cycles.
• Press the MANUAL “ WASH ”, “ AIR ” and/or “ ALCOHOL ” keys to select the desired cycle.
• Pressing the
MANUAL
“
WASH
” key multiple times to cycle through and select the desired cycle
wash time:
• The CER-1 OPTIMA allows a 2, 3 or 5 minutes wash time
• The CER-2 OPTIMA allows a 3 or 5 minute wash time
• The Wash LED light will now illuminate.
• Press the
MANUAL “ AIR ” key multiple times to cycle through and select the desired air purge time
of 0, 3, 5 and 10 minutes. The Air LED light will now illuminate.
• Press the
MANUAL
“
ALCOHOL
” key multiple times to cycle through and select the desired air
purge volume of:
•
The CER-1 OPTIMA allows for 0, 30 or 60cc’s volume
• The CER-2 OPTIMA allows for 0, 30, 60 or 120cc’s volume
• The Alcohol LED light will now illuminate.
• Press
START/STOP key to begin the cycle. The START/STOP light will illuminate green, the
selected Wash, Air and/or Alcohol keys will begin blinking, and the display screen will show Wash,
Air and/or Alcohol and cycle time remaining in minutes.
• If the Wash phase is selected and detergent is preferred, then manually add the detergent when the
“
WASH
” led light is blinking and the display screen shows
WASH
.
• The CER OPTIMA
®
system cover can be opened during the cycle; however, be careful of spraying
fluids. Wearing appropriate PPE is required.
• Upon cycle completion, the audible tone will sound, the
START/STOP
light will turn red, and the
display screen will show Cycle Completed. The printer will automatically generate a printed cycle
report (if auto-print enabled), or press PRINT to manually generate a cycle report.
• Note: The cycle data is retained in the CER OPTIMA system until either the next cycle is started, or
until system power is shut off.
• The completed cycle data will be automatically transferred to the optional CER OPTIMA Data
Management Program (if connected) at the completion of the cycle.