Cantel Medical MEDIVATORS CER OPTIMA Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 70

Cantel Medical MEDIVATORS CER OPTIMA Скачать руководство пользователя страница 38

38

Arrow & Enter Keys

The

ARROW

and

ENTER

keys provide operator access to special CER OPTIMA

®

Endoscope Reprocessing

System sub-menus. These menus allow the CER OPTIMA unit to run, display and print a reprocessing cycle

custom configured by an operator.
With all

AUTOMATIC

and

MANUAL

functions turned off, press the ↓ (down) arrow key to change the

display screen and toggle through the following sub-menus:

•  Set Date
•  Print Options
•  Set Time
•  HLD Cycle Cnt Reset
•  Endoscope ID
•  Operator ID
•  Patient ID
•  HLD MRC Check
•  Barcode Reader
•  Active Database
•  Enable Alcohol
•  Factory Defaults
•  Service Menu: YES NO (accessible by Medivators Service Technician only)

While toggling through the sub-menus, press the

ENTER

key to select a menu, and press the → (right) arrow

and

ENTER

keys to activate or deactivate the sub-menu function. Entering any of the sub-menus will allow

the respective field or function to be activated and changed.
All changes activated through the sub-menu will be retained in the CER OPTIMA system memory, and will be

used as the default setting upon system power on.

LEDs

The front panel keypad LED lights are used to indicate the status of the unit. The lights are on steady when

a setting has been selected, and will blink when that phase of the cycle is occurring. The color green also

indicates what is activated, and red indicates a

STOP

condition.

«
...
36
37
38
39
40
...
»

Содержание MEDIVATORS CER OPTIMA







































































Отзывы:

Нет отзывов