Cantel Medical MEDIVATORS CER OPTIMA, Руководство пользователя

Страница: 44 / 70

44
CAUTION! EACH ENDOSCOPE HOOKUP IS INTENDED ONLY FOR CONNECTION
WITH SPECIFIC ENDOSCOPE MODELS IDENTIFIED IN THE MEDIVATORS ONLINE
HOOKUP. PROPER ENDOSCOPE MODEL AND HOOKUP COMBINATIONS, INCLUDING
CONNECTIONS FOR ALL APPROPRIATE ENDOSCOPE CHANNELS THAT REQUIRE A
SEPARATE REPROCESSING CONNECTION, MUST BE VERIFIED PRIOR TO CONNECTION.
Power CER On
Using the power switch located on the right side of the unit, turn the CER OPTIMA
®
Endoscope Reprocessing
System on. The CER OPTIMA will now power-up as indicated by the lights illuminating and the display
screen showing the date and time, and the HLD Cycle Count. The HLD cycle count represents the number of
reprocessing cycles run on the HLD disinfectant contained within the CER OPTIMA’s reservoir.
The QUALITY ASSURANCE (QA) test must be performed every day upon unit power on. If the unit is
left powered on continuously, then the CER OPTIMA will reset at midnight, and require the QA test to be
performed before a cycle can be run. Refer to the Quality Assurance section for further details on performing
the QA test.
Figure 13. CER OPTIMA Control Panel
!