Canon MP480 series, Электронное руководство

Страница: 583 / 681

Routine Maintenance
There is no photo data on memory card. There is no image data saved on the memory card that
can be read by this machine.
The machine may not recognize the file if the file name or
the folder path contains certain characters. Use only
alphanumeric characters.
Photo data edited or processed on a computer must be
printed from the computer.
Ink absorber is almost full. The ink absorber is becoming full.
The machine has a built-in ink absorber to hold the ink used
during Print Head Cleaning.
Press the
OK
button to cancel the error so you can continue
printing. Before the ink absorber becomes completely full,
contact a Canon service representative. (You will need to
replace a particular part of the machine.)
Ink absorber full. Service required. The ink absorber has become full.
The machine has a built-in ink absorber to hold the ink used
during Print Head Cleaning.
When the ink absorber becomes completely full, contact a
Canon service representative. (You will need to replace a
particular part of the machine.)
Timeout error has occurred. Some errors occurred while copying and a certain time
passed.
Press the
OK
button to dismiss the error, and try to copy
again.
Incompatible device detected.
Remove the device. Check the device connected to the Direct Print Port.
Printing photos directly is possible with a PictBridge
compliant device or the optional Bluetooth Unit BU-30.
A communication time out occurs if an operation takes
too long or if it takes too much time to send data. This
may cancel printing. In such cases, disconnect and
reconnect the USB cable.
When printing from a PictBridge compliant device,
depending on the model or brand of your device, you may
have to select a PictBridge compliant print mode on the
device before connecting it to the machine. You may also
have to turn on your device or select Play mode manually
after connecting the device to the machine. Perform
necessary operations before connecting your device
referring to its instruction manual.
If the error is still not resolved, check if you can print
another photograph.
An unsupported USB hub is connected.
Remove the hub. If a PictBridge compliant device is connected via a USB hub,
remove the hub and connect it directly to the machine.
B200
Printer error has occurred.
See the manual.
Turn off the machine, and unplug the power cord of the
machine from the power supply.
If the problem is not resolved, contact your Canon service
representative.
****
Printer error has occurred.
Turn off power then back on again.
If problem persists, see the manual.
"****" is displayed in the alphanumeric character and
depends on the error occurred.
5100/5110 is displayed:
Cancel printing, turn off the machine. Then clear the
jammed paper or protective material that is preventing
the FINE Cartridge Holder from moving.
Caution
Be careful not to touch the components inside the
machine. The machine may not print out properly if
you touch it.
Turn the machine back on.
If the problem is not resolved, contact your Canon service
Page 583 of 681 pages An Error Message Is Displayed on the LCD