Canon Laser Class 810, Основное руководство по эксплуатации

Страница: 322 / 412

Troubleshoot
ng
11-32
Is the machine in the toner saver mode?
Set <TONER SAVER MODE> to <OFF>. (See “COMMON SETTINGS,” on p. 12-7.)
Faxes do not print.
Have you removed the plastic seal from the toner cartridge?
Make sure you remove the seal from the cartrdge. (See “Set Up the Machne,” n
the Starter Gude.)
Is the toner cartridge installed properly?
Make sure the toner cartrdge s nstalled properly. (See “Set Up the Machne,” n
the Starter Gude.)
Is the cartridge out of toner?
Replace the toner cartrdge. (See “Replacng the Toner Cartrdge,” on p. 10-11.)
Is the correct size of paper loaded in the machine?
Make sure you load paper that meets the requrements for use. (See “Paper
Requrements,” on p. 2-7.)
Change <PAPER SETTINGS>. (See “Settng Paper Sze and Type,” on p. 2-12.)
Received faxes print blotched or unevenly.
Is <ECM RX> set to <ON>?
ECM (Error Correcton Mode) should elmnate such problems. (See “TX/RX
SETTINGS,” on p. 12-11.) However, f the telephone lnes are n poor condton,
ask the sender to send faxes agan.
Is the sender’s machine functioning properly?
Ask the sender to check that the scannng components of the machne are
clean.