Canon Laser Class 700 Series, Сетевое руководство

Страница: 65 / 108

NetWare Network Setup Procedures 3-2
Using a NetW
a
re Netw
o
rk
(Windo
ws)
3
NetWare Network Setup Procedures
To use a NetWare network, it is necessary to perform the following procedures.
IMPORTANT
•
It is recommended that the Network Administrator perform steps 1, 2, and 3 above.
•
To configure settings with software other than NetSpot, the TCP/IP protocol must be
supported by your network environment.
•
If you want to print on a NetWare network, disable the banner page. See ‘Using a Web
Browser (Remote UI),’ on p.2-14.
1
Connect the network cable. (See Chapter 1, “Before You Start Using This
Machine,” in the
PCL Printer Guide. )
Connect the network cables in accordance to the directions specified in the PCL Printer Guide .
2
Specify the NetWare print service settings.
(See “NetWare Print Service Settings,” on p. 3-3.)
Specify the NetWare print service settings, using one of the following methods:
•
NetSpot (Canon software provided with the optional Network Kit III)
•
NWADMIN or PCONSOLE (Novell software provided with NetWare)
3
Specify the protocol settings. (See “Protocol Settings,” on p. 3-9.)
Specify the machine’s protocol settings on the computer using one of the following methods:
•
NetSpot (Canon software provided with the optional Network Kit III)
•
Remote UI (a web browser)
•
An FTP client
4
Specify the computer settings for printing.
(See “Setting Up a Computer for Printing,” on p. 3-11.)
Connect each computer you want to use for printing to a NetWare network, and install the printer driver
software.