Specifying Protocol Settings
2-19
Using a
TCP/IP Netw
o
rk
(Windo
ws/UNIX)
2
11
Click [OK].
The settings become valid after you reset the print server or restart the machine.
To reset the print server, under [Device Manager], on the left column of the
screen, select [Network]
➞
click [Reset].
The protocol settings are complete.
Using ARP/PING Commands
Instead of using the operation panel of your machine, NetSpot, or the Remote UI,
you can use ARP/PING commands to specify the protocol settings.
1
Start up the MS-DOS prompt or the Command prompt.
If you are using UNIX, display the Console screen, and then log on as a
superuser.
2
Execute the following command to add a static entry to the
arp table.
arp -s
<IP Address> <MAC Address>
IP Address:
Specify the IP address you want to allocate to the machine.
The IP address consists of four numbers delimited by periods,
ranging from 0 to 255.
Содержание Laser Class 700 Series
Страница 2: ...LASER CLASS 700 Series Network Guide...
Страница 19: ...Checking Your Network Environment 1 8 Before You Start 1...
Страница 63: ...Printer Management 2 44 Using a TCP IP Network Windows UNIX 2...
Страница 83: ...Setting Up a Computer for Printing 4 8 Using a NetBIOS Network Windows 95 98 Me 4...