TCP/IP Network Setup Procedures
2-2
Using a
TCP/IP Netw
o
rk
(Windo
ws/UNIX)
2
TCP/IP Network Setup Procedures
To use a TCP/IP network, it is necessary to perform the following procedures.
IMPORTANT
•
It is recommended that the Network Administrator perform steps 1 and 2 above.
•
If you are printing using a TCP/IP network, you can use the following print applications:
- LPD (Line Printer Daemon)
- FTP (File Transfer Protocol)
- Raw (Windows 2000/XP only)
- IPP (Internet Printing Protocol) (Windows 95/98/Me/2000/XP only)
•
This machine does not come with printer driver software that can be used for each UNIX
platform.
•
If you are configuring the basic protocol settings for the first time, use the operation panel
on your LASER CLASS 700 Series machine.
1
Connect the network cable. (See Chapter 1, “Before You Start Using This
Machine,” in the
PCL Printer Guide.
)
Connect the network cables in accordance to the directions specified in the
PCL Printer Guide
.
2
Specify the protocol settings. (See “Specifying Protocol Settings,” on p. 2-3.)
Specify the machine’s protocol settings using one of the following methods:
•
The machine’s operation panel (Data Registration menu)
•
NetSpot (Canon software provided with the optional Network Kit III)
•
A web browser (Remote UI)
•
ARP/PING commands
•
An FTP Client
3
Specify the computer settings for printing. (See “Setting Up a Computer for
Printing,” on p. 2-22.)
Connect each computer you want to use for printing to a TCP/IP network, and install the printer driver
software.
Содержание Laser Class 700 Series
Страница 2: ...LASER CLASS 700 Series Network Guide...
Страница 19: ...Checking Your Network Environment 1 8 Before You Start 1...
Страница 63: ...Printer Management 2 44 Using a TCP IP Network Windows UNIX 2...
Страница 83: ...Setting Up a Computer for Printing 4 8 Using a NetBIOS Network Windows 95 98 Me 4...