Canon Laser Class 700 Series, Сетевое руководство

Страница: 23 / 108

Specifying Protocol Settings 2-4
Using a
TCP/IP Netw
o
rk
(Windo
ws/UNIX)
2
Specifying Network Settings from the Operation Panel
Use the procedures described in this section to specify the following network
settings:
•
IP Address (automatically or manually)
• Subnet Mask
•
Default Gateway
•
DNS Server Address
•
DNS Dynamic Setting
• Host Name
•
Domain Name
IMPORTANT
Specified settings from the operation panel become effective after the machine has been
restarted (When you disconnect the power cord, then connect it again).
NOTE
•
For specific network settings, contact your Network Administrator.
•
Althrough you may specify the network settings from the operation panel of the machine,
it is much easier to specify these settings from the Remote UI. (See "Using a Web
Browser (Remote UI)," on p.2-14).
1
Open all three one-touch speed dialing panels.
2
Press [Data Registration].
3
Press [
▼
] or [
▲
] until <6.SYSTEM SETTINGS> appears
➞
press [Set].
IMPORTANT
If the prompt <PASSWORD> is displayed, enter the System Administrator’s
password using the numeric keys. For information on how to enter the System
Administrator’s password, see Chapter 4, “Restricting the Use of the Machine,” in
the
Reference Guide .
➞
Data
Registration
Set