Canon iPF800 Series, Руководство по обслуживанию

Страница: 234 / 320

Chapter 4
4-54
4.4 Applying the Grease
4.4.1 Applying the Grease
0020-5711
iPF810 / iPF820
Apply the grease at the location shown below.
Smear the grease lightly and evenly with a flat brush.
Don't apply the grease to locations other than those designated. Unwanted grease may cause poor print quality, take particular care that grease does not get onto the
wiper, cap, or the linear scale.
T-4-2
1. The joint base rib of carriage unit [1]
F-4-120
No. Place Kind Quantity Note
1 The joint base rib of carriage unit Molykote PG-641 Smear the grease
lightly
2 Feed roller backup x 2 parts Permalub G No.2 approx.12mg Don't apply to central backup with
bearing.
Bushing Permalub G No.2 Smear the grease
lightly
Feed roller bearing Permalub G No.2 approx.24mg Apply if remove bearing from a feed
roller.
3 Pinch roller release bushing x 5 parts Permalub G No.2 Smear the grease
lightly
Pinch roller pressure release gear Permalub G No.2 Smear the grease
lightly
The concave of the pinch roller arm x 28
parts Permalub G No.2 Smear the grease
lightly
4 Upper cover stay shaft hole Permalub G No.2 approx.24mg
The gear shaft of the upper cover stay gear Permalub G No.2 approx.24mg
Upper cover stay shaft end Permalub G No.2 approx.24mg
The gear tooth face of upper cover stay Permalub G No.2 Smear the grease
lightly
[1]
[2]