Canon imageRUNNER ADVANCE 6075 Series, Руководство по обслуживанию

Страница: 905 / 1406

8
8
8-123
8-123
Service Mode > COPIER > OPTION > FNC-SW
Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
CDS-UGW Set to allow firmware update from UGW
Lv.1 Details To set whether to permit update of the firmware from the UGW
server.
When “1: Enabled” is set, Updater accepts the operation from the
UGW server in cooperation with CDS.
Use case When allowing update of the firmware from the UGW server
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
Supplement/memo CDS: Content Delivery System
LOCLFIRM Set to allow firmware update by file
Lv.1 Details To set whether to permit the user (administrator) to update the
firmware from the remote UI using a local file.
This update is executed as a measure for vulnerability in emergency
situations.
Use case When allowing the administrator to update the firmware using a file
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 1
RSHDW-SW ON/OFF of remote shutdown
Lv.1 Details A shared multi-function machine is not likely to be shut down at
power failure. Set ON/OFF of the remote shutdown function to
prevent accident.
When “1: ON” is set, the machine can be shut down from the remote
shutdown menu displayed in the remote UI.
Use case When preventing an accident at specified power-off time.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
T-RUN-LV No.of keep print at Toner Cntner rplce
Lv.1 Details To set the number of prints to be kept from the indication of Toner
Container replacement until job is interrupted.
The time to keep printing varies depending on image ratio and
productivity.
Use case When replacing the Toner Container while printing without
interruption
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: Approx. 900 sheets, 1: Approx. 140 sheets (A4, 5% image ratio)
Default value 0
COPIER > OPTION > FNC-SW
BXNUPLOG ON/OFF of Nup log at Inbox print
Lv.2 Details To set whether to keep Nup log at Inbox print.
Use case When keeping Nup log at Inbox print
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value At normal service: 0, At customization: 1
SDLMTWRN Cpcty warn dis ON/OFF at E-mail/I-Fax TX
Lv.1 Details To set whether to display the warning message when sending data
that exceeds the upper limit value for the transmission data size via
E-mail/I-Fax.
Use case For customization
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value 0
Related user mode Function Settings> Send> E-Mail/I-Fax Settings> Maximum Data
Size for Sending
JLK-PWSC ON/OFF of PCAM password auth doc scan
Lv.2 Details To set whether to scan the PCAM password authentication document
with the MEAP application.
Use case When scanning the PCAM password authentication document
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value 0
ATUDILOG ON/OFF of UDI log record
Lv.2 Details To set ON/OFF of UDI log record mode.
UDI log file is normally written in HDD file, but it is deleted at start-up
so the UDI log is not recorded.
When 1 is set, UDI log is recorded in HDD at job assignment, and is
written out with sub log when obtaining it with USB memory (it can
be also obtained from SST).
Use case When investigation is not possible with only sub log at the time of
trouble occurrence
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to get approval from the user by telling that third party other
than Canon cannot recover the original document and image from
UDI log.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0