Canon imageRUNNER ADVANCE 6075 Series, Руководство по обслуживанию

Страница: 456 / 1406

4
4
4-135
4-135
Parts Replacement and Clearning > Image Formation System > Removing the Developing Cylinder and the Developing Roller
Parts Replacement and Clearning > Image Formation System > Removing the Developing Cylinder and the Developing Roller
2-5) Lift the left side to remove the Developing Cylinder Blade in the direction of the arrow.
• 2 Bosses
x2
CAUTION:
Do not disassemble the Developing Cylinder Blade. Otherwise, cleaning of the
Developing Cylinder is not properly executed when removing just the Blade (as a
single part).
<Procedure>
1) Remove the Grip Ring, the Gear, the Parallel Pin, the C Ring, the Spacer, the Developing
Roller and the O Ring in the rear.
CAUTION: Point to Caution at Installation
• Be sure to install the C Ring and the Spacer correctly.
• Be sure to use a dedicated tool when installing/removing the Grip Ring and C Ring.
F-4-183
Grip Ring
Parallel Pin
Gear
Spacer
Developing
Roller
O Ring
C Ring
Spacer
O Ring
(Black)
2) Remove the C Ring, the Spacer, the Developing Roller and the O Ring.
Spacer
O Ring
(Black)
Spacer
O Ring
Developing
Roller
C Ring
CAUTION:
The C Rings and the O Rings removed in step 2 and 3 cannot be reused. Be sure to
use the C Rings and the O Rings included in the package.
Be sure to use a dedicated tool when installing/removing the Grip Ring and C Ring.
F-4-184
F-4-185