Canon imageRUNNER ADVANCE 6075 Series, Руководство по обслуживанию

Страница: 462 / 1406

4
4
4-141
4-141
Parts Replacement and Clearning > Image Formation System > Removing the Transfer Roller
Parts Replacement and Clearning > Image Formation System > Removing the Transfer Roller
Removing the Transfer Roller
<Preparation>
1. Pull out the Fixing Feed Unit. (Refer to "Removing the ETB Unit")
2. Remove the ETB Unit. (Refer to page 4-137)
3. Remove the ETB. (Refer to page 4-139)
CAUTION:
Do not touch the surface of the ETB Drive Roller and the Transfer Roller; otherwise, it
can cause image faults.
<Procedure>
1) Turn over the Roller Unit to remove the Claw of the Transfer Roller Shaft Support with
needlenose pliers.
x2
F-4-197
2) Remove the Transfer Roller Shaft Support from the Transfer Roller.
NOTE:
When installing the Transfer Roller Shaft Support to the Roller Unit, be sure to check
that the bosses of the Transfer Roller Shaft Support are fitted into the Springs.
F-4-199
F-4-198