Canon imageRUNNER ADVANCE 6075 Series, Руководство по обслуживанию

Страница: 127 / 1406

2
2
2-73
2-73
Technology > Image Formation System > Controls > Image Stabilization Control
Technology > Image Formation System > Controls > Image Stabilization Control
● Execution Timing
Execution items for image stabilization control differ according to the environment and condition of image formation parts. Following shows the control items at each sequence.
Illustration.*70 deg C or lower in the fixing temperature,** 30 sec.70 deg C or lower in the fixing temperature,***Fixing temperature remaining high at power OFF/ON
Control
Standard
duration
(second)
Approx.
Timing
Remarks
Warm-up rotation
Initial
rotation
Paper
interval
Interruption
Last
rotation
Arbitrary
At
startup*
Normal
startup
**
power
OFF/
ON***
Door
open Jam
recovery
Forcible
interruption
at 2,000
sheets
Low duty
ejection
Normal
PASCAL
(Full
correction)
PASCAL
(Quick
correction)
Full Potential
Control
8 ○ × × × × (○ ) × × × (○)*1 ○ ○
*1 Operation Criteria
• Last rotation after the first job right after startup first time
for the day takes 10 minutes or longer
• Last rotation after processing 1,500 sheets or more
following the last potential control execution
• Last rotation after the first job following 90 minutes or
more elapsed from the last potential control executio
APC Correction
at Paper Interval
0.2 × × × × × ×
○
*5
× × × × ×
*5 At every 20-sheet interval
APC Control
at Warm-up
Rotation
2 × × × × × (○)*6 × × × × × ×
*6 Operation Criteria
• Initial rotation after the first job following 60 minutes or
more elapsed from the last job completion
APC Correction
at Last Rotation
2 × × × × × × × × × (○)*7 × ×
*7 Operation Criteria
• Last rotation after the first job following 30 minutes or
more elapsed from the last job completion
Drum Idle
Rotation at First
in the Day
60.0 ○ × × × × × × × × × × ×
Charging Wire
Cleaning
30 × × × × × × × (○)*8 × (○)*8 × ×
*8 Operation Criteria
• Last rotation after 1,500 sheets or more processed
following the last Charging Wire cleaning execution
• Forcibly interruption at 2,000 sheets or more processed
following the last Charging Wire cleaning execution
LED Intensity
Correction / Belt
Background
Correction
3.5 ○ ○ × ○ ○ × × × × × × ×
Idle Rotation at
First in the Day
15 to 30 ○ ○ ○ ○ ○ × × × × × × ×
To stabilize toner toribology after long idle time
Low Duty
Ejection
- × × × × × × × × ○ ○ × ×
- To prevent toner deterioration during continuous Low DUTY
image printing
Blank Band
Control
*11 × × × × × × × × ○ ○ × ×
*11
When the predefined sheets were printed