Canon imageRUNNER ADVANCE 6075 Series, Руководство по обслуживанию

Страница: 162 / 1406

2
2
2-108
2-108
Technology > Fixing > Controls > Shutter Control
Technology > Fixing > Controls > Shutter Control
■
Shutter Control
● Overview
To prevent image failure and reduction in productivity caused by temperature rise at the edge,
this machine introduces the Shutter (to shield magnetic flux; nonmagnetic substance), so that
position of the Shutter is controlled according to the detected temperature of the edge.
● Execution timing
• When reaching the detection temperature of Sub Thermistor (THM2) and Shutter
Thermistor (THM3) to the Shutter operation temperature
• When printing is completed
● Control description
By rotating the Shutter Motor (M15) for the specified amount, the Shutter is set in the
specified position. There are cut-offs on the circumference of the Shutter Drive Gear (front)
which is engaged with the Shutter. Detection of this cut-offs by the Shutter HP Sensor (PS53)
determines whether the Shutter is set in the specified position.
Shutter drive
gear (front)
Shutter drive gear (rear)
Fixing Shutter
Home Position
Sensor(PS53)
Shutter
Fixing Shutter Motor(M15)
Drive axis
Shutter drive gear (front)
Cut-off
(for HP detection)
Cut-off
(for medium-size
paper detection)
Cut-off
(for small-size
paper detection)
Fixing Shutter Home Position Sensor(PS53)
The shutter is set in any of the specified positions during printing according to the paper size
and detected temperature of the Thermistor.
F-2-136
The shutter is set in the home position when printing is completed.
< Home Position (HP)>
Shutter
< Position for middle paper size>
Shutter
<Position for small paper size>
Shutter
F-2-137
F-2-138
F-2-139